Certifications - Custom Fabric Air Diffuser Systems
FlowCon Fabric Air Diffusers have been tested to meet the highest quality standards. Product testing is an ongoing process. Please check our website for up-to-date information.
Underwriter's Laboratories (UL)
UL Classified / Certified to NFPA-90A
Fiberglass High Temp
Requirements to certify are to pass the 25/50 Flame Spread / Smoke Developed requirements of ASTM E-84 (Tunnel Test). UL Classification ensures continued compliance for all products manufactured.
CAN/ULC Listed (Canada only)
Polyethylene
Products meet the minimum requirements to pass the 25/50 Flame Spread / Smoke Developed requirements of ULC test method S102.2 "Standard Method of Test for Surface Burning Characteristics of Flooring, Floor Covering and Miscellaneous Materials and Assemblies".
ICC EVALUATION Evaluation Service Inc. (ICCES)
BOCA-94-08
Polyethylene, Polyester
Requirements to certify are to pass the 25/50 Flame Spread / Smoke Developed requirements of ASTM E-84 (Tunnel Test). These requirements additionally include weight, air permeability, mold growth and humidity, high temperature, low temperature, erosion and pressure. Additional requirements include an acceptable production quality program, comprehensive public design manual / support and continued compliance for all components.
SGS U.S. Testing Company Inc.
XStatic
Requirements to certify are to pass the 25/50 Flame Spread / Smoke Developed requirements of ASTM E-84-07 Standard Test Method for Surface Burning Characteristics of Building Materials.
USDA
Accepted for Meat and Poultry Facilities
Polyethylene, Polyester
Evaluated and approved for use in Meat and Poultry Facilities by the USDA(1996).
Wisconsin Department of Agriculture, Trade and Consumer Protection
Material Compliance
Polyethylene, Polyester
Material complies with sanitary construction requirements in Wisconsin dairy and food regulations for materials used in non-product contact areas.
| 
